We advise that each 8 PCS P4 display panel with 1x RV908 receiving card and. 8PCS P5 display panel with. The product of the cascade is very simple, each receive card has two gigabit network port, you just need to connect two receiving card via the network cable, then setting the PC software simply, the product will be combined together, become a big screen.
The DIY Kit doesn't include the frame, and the computer. That's just for reference.Which is only used to display how to assemble LED SIGN. And install sending card to desktop PC. Usually, we use the magnet screws to. Display module on the U-shaped iron bar. If you need the frame, please contract us at first. If the frame is very big, because of the international express has the size limit, so we cannot express the big frame. Note , the product include the magnet screw. We can use the common L-shaped iron bar, or U-shaped iron bar making frame. At a time , Because different batches of LED modules have a few differences in RGB rank, color, frame, brightness etc.
In any case, the different batches of LED display board can not be combined together. Here is the P4 display board link. The sending card has two RJ45 Ports, one is D-Port, the other is U-Port. The U-port is close to the sending card indicator, The receiving card should be connected to the U-port of the sending card by the network cable. This product is not a finished product, it is a DIY kit.
It needs to customers DIY assembly, in some cases, customers need to make a simple frame for it, It requires the customer has a Hands-on ability and electronic knowledge, also needs to customers are more familiar with PC, install the software independently, also familiar with the operation of commonly used software. This DIY kit also includes a send box, if you just have a laptop, it has an HDMI port, then we can install the send card to the sending box, and then use the HDMI-DVI cable and USB cable to connect the sending box and laptop. 1 80 x P4 LED Display Boards 2 10 x RV908 Receiving Card 3 1 x TS802 Sending card. 4 1 x Sending Box 5 10 x 300W 5V DC switching power supply(110V , 220V). 7 1 x 5m Network cable.8 9 x 2m Network cable. 9 80 x 5V DC wire (has been connected to the switch power supply in advance) 10 80 x 16 Pin gray flat cable. 11 320 x magnet screw. It will not reflect the total price you paid or the market value of the product. Different country with different tariff rules.
If the item is defective, please notify us within 30 days after the receipt of the item. The item is not refundable after 30 days, it will only be repaired. FEEDBACK IS VERY IMPORTANT TO US.It is impossible to address issues if we do not know about them! If you have any questions or any unsatisfactory such as :not received , not as described, broken item, can't meet your need, received wrong item. We will have professional customer service to serve for you, and will give you a satisfactory solution as you wish. Hope we have a pleasant cooperation. The item "40x100 P4 RV908 TS802 LED Video Wall Programmable Full Color LED SIGN DIY Kit" is in sale since Wednesday, April 5, 2017. This item is in the category "Business & Industrial\Retail & Services\Business Signs". The seller is "ledworld85" and is located in HongKong. This item can be shipped worldwide.