Led Sign Color

LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit

LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit
LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit
LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit
LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit
LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit

LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit

15"x30" P4 Video Programmable Full Color RGB LED SIGN DIY Kit Asynchronous i5AF. This product doesn't need sending card, but need Gigabit LAN. The video is transmitted to the LED SIGN via the network cable.

Memory, it can save about 3 minutes program. If the program time exceeds 3 minutes, you can only use the synchronous mode, synchronous mode requires a dedicated PC, the PC used to run special the software then sends the video to the LED SIGN via Gigabit Ethernet ports. If the program time is short, time less than 3 minutes, then we can use the. Do not need special PC , receiving card can work alone.

The product of the cascade is very simple, each receive card has two gigabit network port, you just only need to connect two receiving card via the network cable, then simply setting the PC software, the product will be combined together, become a big screen. This product includes 9x P4 LED display board , 1x i5AF receiving card and 1x 300W 5V DC switching power supply. Make them into a big LED SIGN. The DIY Kit does not include the frame, The picture shows some frame, that's just for your reference.

Picture is only used to display how to assemble LED SIGN. We usually use the magnet screws display module on the U-shaped iron bar. If the frame is very big, because of the international express has the size limit, so we cannot express the big frame. NOTE , the product include the magnet screw. We can use the common L-shaped iron bar, or U-shaped iron bar making frame.

At a time , Because different batches of LED modules have a few differences in RGB rank, color, frame, brightness etc. In any case, the different batches of LED display board can not be combined together. This product is not a finished product, it is a DIY kit. It needs to customers DIY assembly, in some cases, customers need to make a simple frame for it, It requires the customer has a Hands-on ability and electronic knowledge, also needs to customers are more familiar with PC, install the software independently, also familiar with the operation of commonly used software.

C5 can be linked to PC via USB, and it has many advanced features such as automatic brightness adjustment. 1 9 x P4 LED display board. 2 1 x i5AF receiving card. 3 1 x 300W 5V DC switching power supply(110V , 220V). 4 1 x TG - 3269C gigabit nics. 5 1 x 5M cable. 6 10 x5V DC wire has been connected to the switch power. 7 10 x16 Pin gray flat cable. 8 40 x magnet screw. It will not reflect the total price you paid or the market value of the product.

Different country with different tariff rules. We stand behind our products so you are always covered! If the item is defective, please notify us within 30 days after the receipt of the item. The item is not refundable after 30 days, it will only be repaired. The item "LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit" is in sale since Tuesday, July 25, 2017.

This item is in the category "Business & Industrial\Retail & Services\Business Signs". The seller is "cathyzhao86" and is located in Hong Kong.

This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • Country of Manufacture: China
  • Country/Region of Manufacture: China
  • Color: Multi-Color
  • Type: Interior Sign
  • Model: P4
  • Dimensions: 15x 30in.
  • Bundle Listing: No


LED Video Wall Panel P4 i5AF15x30 Programmable Full Color LED SIGN DIY Kit