Led Sign Color

Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit

Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit

Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit
Live Video 50"x76" P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit. We advise that each 12PCS P5 display panel with 1x i5AF receiving card; And each 8PCS P5 display panel with 1x300W switching power supply. The system is synchronous, asynchronous dual-mode system, asynchronous system implementation is as follows: The entire system has four colorlight i5AF receiver card, i5AF has 2GB storage, they can save about 2-3 minutes of video, if your PC already has a Gigabit network Port, then please connect the PC Gigabit network port to the LED SIGN (the first i5AF receive card), then we can upload the program to the LED SiGN, can also send the program to the LED SIGN via the gigabit network, if your PC does not have gigabit network, we also provide a Gigabit Ethernet card, please install Gigabit Ethernet card to your PC, and then connect Gigabit network to LED SIGN. The system also includes colorlight S2 sending card, KS600 LED video processors, two of which can be combined into a synchronization system that can support input real-time video and display real-time video to LED SIGN, Here we will briefly explain how this real-time video system works, S2 send card is equivalent to a video capture device, it has a DVI video input terminal, if there is a video signal input to the S2 send card, then the S2 send card will automatically convert it For the LED SIGN signal, if the LED SIGN is connected to S2, then the input video of S2 will be automatically displayed to the LED SIGN, S2 can be installed on the PCI-E port of the desktop PC.

Special Note: The purpose of the PCI-E port is to provide only 5VDc power supply for S2, S2 can work independently, S2 does not need to be installed on PC, If we can provide a 5VDC power supply to S2, then it can work anywhere, it can also be installed in the KS600, in which it has been installed in the KS600 LED video processor. Desktop PC usually has two video output ports (one is the DVI port, one is the VGA port), the laptop usually has an additional VGA port or an HDMI port, please think of the LED SIGN as another monitor PC, so PC There are two monitors, one is the computer monitor, the other is the LED SIGN, If S2 is working with a desktop PC, then the S2's DVI port should be connected to the PC's DVI port, and its configuration port should be connected to the desktop PC's USB port. If S2 is working with a laptop, then the S2's DVI port should be Connected to the laptop's HDMI port via the HDMI-DVI cable, its configuration port should be connected to the laptop's USB port.

In this system, the S2 sending card is installed on the KS600, and the KS600 provides 5Vdc as the power supply for S2. Or we can google "how to set multiple monitors to show the same content", before using S2, we have to complete this step, otherwise S2 will not work. KS600 is equivalent to a multi-select signal selector, it has five signal input, including DVI, VGA, HDMI, BNC port, its input port can be connected to a DVD player, camera, PC, laptop, TV and so on Real-time signal source, The KS600 has two DVI video output ports, both of which can be connected to the S2 send card, but we only use the KS600's DVI-1 port to connect to the S2's DVI port. Here is a brief introduction to the entire system of the signal connection, S2 sending card is installed in the KS600 LED video processor, KS600 for the S2 supply 5VDC power supply, KS600 output terminal DVI-1 is connected to the S2 input DVI terminal, laptop USB port Connected to the configuration port of S2, the VGA port of the laptop is connected to the VGA port of KS600, the HDMI port of the DVD player is connected to the DVI port of the KS600 via the HDMI-DVI cable.

KS600 has 5 signal channel buttons corresponding to 5 signal sources, in this system, if we press the DVI button, then the DVD player's video signal will be displayed to the LED SIGN, the entire signal loop as follows: DVD player -> HDMI- DVI cable -> KS600 DVI input port -> KS600 DVI-1 output port -> DVI cable -> S2 send card DVI input port -> S2 send card output port A-> network cable -> first i5AF receiving card (lower right) -> network cable -> second i5AF receiving card (lower left) -> network cable -> third i5AF receiving card (top left) -> network cable -> fourth i5AF receive cards (top right). If we press the VGA button, then the laptop's video signal will be displayed to the LED SIGN, the entire signal loop as follows: laptop's VGA port -> VGA cable -> KS600 VGA input port -> KS600 DVI-1 output port -> DVI cable -> S2 send card DVI input port -> S2 send card output port A-> network cable-> first i5AF receiving card (lower right) -> network cable -> second i5AF receiving card (lower left) -> network cable -> third i5AF receiving card (top left) -> network cable -> fourth i5AF receive cards (top right). If the LED SIGN displays the PC monitor screen synchronously, the KS600 also has a common function. When we press the "part" button, the LED SIGN will display the entire monitor screen or only the LEDVISION playback window.

Special note that this DIY kit does not include DVD players as well as laptops, pictures include them just to show how real-time video works. The product of the cascade is very simple, each receive card has two gigabit network port, you just only need to connect two receiving card via the network cable, then simply setting the PC software, the product will be combined together, become a big screen. Make them into a big LED SIGN. The DIY Kit does not include the frame, The picture shows some frame, that's just for your reference. Picture is only used to display how to assemble LED SIGN.

We usually use the magnet screws display module on the U-shaped iron bar. If the frame is very big, because of the international express has the size limit, so we cannot express the big frame. NOTE , the product include the magnet screw. We can use the common L-shaped iron bar, or U-shaped iron bar making frame. At a time , Because different batches of LED modules have a few differences in RGB rank, color, frame, brightness etc. This product is not a finished product, it is a DIY kit. It needs to customers DIY assembly, in some cases, customers need to make a simple frame for it, It requires the customer has a Hands-on ability and electronic knowledge, also needs to customers are more familiar with PC, install the software independently, also familiar with the operation of commonly used software. 1 48 x P5 LED display board. 2 4 x i5AF receiving card.

3 6 x 300W 5V DC switching power supply(110V, 220V). 4 1 x TG - 3269C gigabit nics.

5 1 x S2 Sending Card. 6 1 x KS600 LED video processor. 7 1 x 5M net cable. 8 3 x 2M net cable. 9 48 x5V DC wire (has been connected to the switch power supply in advance). 10 48 x16 Pin gray flat cable. 11 200 x magnet screw. It will not reflect the total price you paid or the market value of the product. Different country with different tariff rules. We stand behind our products so you are always covered! If the item is defective, please notify us within 30 days after the receipt of the item. The item is not refundable after 30 days, it will only be repaired. The item "Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit" is in sale since Tuesday, July 25, 2017.

This item is in the category "Business & Industrial\Retail & Services\Business Signs". The seller is "cathyzhao86" and is located in Hong Kong.

This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • Country of Manufacture: China
  • Country/Region of Manufacture: China
  • Color: Multi-Color
  • Type: Interior Sign
  • Model: P5
  • Dimensions: 50x 76in.
  • Bundle Listing: No


Live Show 50x76 P5 S2 i5AF KS600 LED Video Wall Full Color LED SIGN DIY Kit